Oli Cooler help needed (sorry for the English)

Umbauthreads, Ideenfindung, Bilderstelle
Antworten
Eran_k
schaut sich noch um
schaut sich noch um
Beiträge: 9
Registriert: 27. Feb 2017, 12:30

Oli Cooler help needed (sorry for the English)

Beitrag von Eran_k »

Hello Gentleman's,
my brother and i are currently building a scrambler out of a freewind.
the oil cooler is in a bad shape and we are looking to replace it.
there aren't any good condition oil coolers on ebay, and i personally think that the original cooler is a little too big.
has anyone replaced the oil cooler with another one and can share his advise, links, tips etc..

thanks in advance
Eran Kaufman
i have attached an image of how the bike going to look
e5181b75-4144-4b09-93d8-dfbd071e245f.jpg
Benutzeravatar
AoS
Site Admin
Site Admin
Beiträge: 1916
Registriert: 27. Jun 2006, 20:58
Wohnort: Köln

Re: Oli Cooler help needed (sorry for the English)

Beitrag von AoS »

Honda XR 400:
Bild

I haven't replaced mine, but this is what I'd go for. For sure it is small, but the XF engine is sturdy, and if you monitor the oil temperature it should be sufficient most of the time. I'd avoid inner city stop and go traffic in summer though.

Dirk
Schönste Freewind der Welt:
http://www.lucasmatic.de
Benutzeravatar
Maad
Site Admin
Site Admin
Beiträge: 1260
Registriert: 19. Nov 2003, 21:06
Wohnort: Oberhausen

Re: Oli Cooler help needed (sorry for the English)

Beitrag von Maad »

I'm owner of a ccm r30 with freewind engine. The oil cooler got only half size of the freewind.
I've never had temperature problems.
Some 'ccm-racers' in the uk drive completely without any oil cooler but on racetrack there is no stop and go.

Marek
Eran_k
schaut sich noch um
schaut sich noch um
Beiträge: 9
Registriert: 27. Feb 2017, 12:30

Re: Oli Cooler help needed (sorry for the English)

Beitrag von Eran_k »

Can you post an image of the oil cooler please?
is it unique to CCM of a bought unit?

Thanks
Benutzeravatar
Maad
Site Admin
Site Admin
Beiträge: 1260
Registriert: 19. Nov 2003, 21:06
Wohnort: Oberhausen

Re: Oli Cooler help needed (sorry for the English)

Beitrag von Maad »

Yes, it is a OEM-part.
In this ccm cafe racer thread are some pictures of the oil cooler.

Marek
Antworten